Product introduction ：Alkali-free Liquid Flash Setting Admixture is a supporting product for wet spraying of concrete and mortar, which has the advantages of good workability, low resilience, less dust, and high 28d strength, etc.. It is widely used for temporary and permanent protection of underground tunnel projects such as national defense, coal, transportation, hydropower, and geology. This product is environmentally friendly, non-toxic, harmless to humans and non-corrosive.
Technical parameters ：
Standard
《Flash setting admixtures for shotcrete》(GB/T 35159-2017)
Main Technical Performance
▪ The initial setting time is 2-3min; The final setting time is 4-10min
▪ 1d compressive strength is 8MPa; 28d compressive strength is 75%
▪ Using this product can shorten the construction period, reduce the cost, and can ensure the quality. It is an ideal chemical building material.
Usage and precautions
▪ Dosage: 6% of the weight of the cementing material.
▪ During the construction, the water-cement ratio should be strictly controlled at 0.3-0.5, because an excessive water-cement ratio will affect the setting time and strength.
▪ Feed the mixing concrete into the jet and add the flash setting admixture at the nozzle.
▪ There are adaptability problems of flash setting admixture to cement. Before using or changing cement varieties, adaptability tests are needed to determine the optimal dosage.
▪ The shotcrete should be strengthened in the early stage to ensure that the hydration reaction proceeds smoothly, so as to reduce the decrease in strength in the later stage.
▪ If the cement has a long storage period or is damp, the dosage of flash setting admixture should be increased.
Packaging, transportation, and storage
▪ This product is packed in 250±2kg plastic drum, or agreement packaging.
▪ It should be stored in a dry and ventilated place, protected from rain and freezing.
▪ It is valid for 3 months and can be used after retest when it is expired.
Performance Index of Flash Setting Admixtures
